Michigan DNR Custom Load Bearing Vest with Molle on Bottom Half - Purchase Order | BCE-CUSTOM-MIDNR-HALF-MOLLE-PO - Blue Stone Safety Products Load Bearing Body Armor Vest Pouches

Custom Load Bearing Vest with Molle on Bottom Half - Purchase Order | BCE-CUSTOM-HALF-MOLLE-PO

LAPD Blue Custom Load Bearing Vest with Molle on Bottom Half, Molle on Both Side Straps, Zipper Down the Middle, POLICE Patch Sewn on Back, and Metal Eyelets for Badge and Name Tag - Purchase Order | BCE-CUSTOM-HALF-MOLLE-SANDOWNPD

Michigan DNR Custom Load Bearing Vest with Molle on Bottom Half - Purchase Order | BCE-CUSTOM-MIDNR-HALF-MOLLE-PO

Product Code: BCE-CUSTOM-MIDNR-HALF-MOLLE-PO

NOTE: All Required Questions (Marked with a red Asterisk *) need to be answered so your order may be added to the cartEach Custom-Tailored Load Bearing Vest is made to fit your body armor panels and inner carrier. Once completed, your body armor will remain inside of your current inner carrier, and will be placed inside of the BlueStone Safety custom external carrier that is made for you.To See More Colors and Styles of Our Load Bearing Vest Carriers,Please Click the Red Arrow to the Right of the Main Image

To order a custom fit load bearing vest, please fill in the measurements below using our Mobile-Friendly interface. With just a few simple pictures and measurements, we'll create the custom load bearing vest you've always wanted.Available Options

* A: Back Panel - Length:

Please specify the Back Panel Length in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Back Body Armor Panel with a Measuring Tape Showing the Width at the Widest Point:

If the photo upload is not working it is ok! You can email the photos to one of our customer service reps after the order has been placed. Please process the order without the photos and we will take care of them after the order is submitted.

* B: Back Panel - Height:

Please specify the Back Panel Height in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Back Body Armor Panel with a Measuring Tape Showing the Height down the Middle:

* C: Back Panel - Wing Height:

Please specify the Back Panel - Wing Height in inches:
(view Instructions tab below for clarification)

* D: Front Panel - Length:

Please specify the Front Panel - Length in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Front Body Armor Panel with a Measuring Tape Showing the Width at the Widest Point:

* E: Front Panel - Height:

Please specify the Front Panel - Height in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Front Body Armor Panel with a Measuring Tape Showing the Height Down the Middle:

* Chest Measurement:

Chest Measurement

Please specify the Chest Measurement in inches:
(view Instructions tab below for clarification)

* Mid-Abdomen:

Measure abdomen at the widest portion of your mid-section.

* Front to Back Measurement:

Front to Back

Please specify the Front to Back Measurement in inches:
(view Instructions tab below for clarification)

* Waist Size (in inches):

Please measure around your waist, just above your duty belt. Please give us this measurement in inches.

* Vest Gap:

vest gap

Please specify the Vest Gap Measurement in inches:
(view Instructions tab below for clarification)

* Height:

Please Enter Your Height. Examples: 5 feet 7 inches , 6 feet 2 inches, etc.

* Weight:

Please enter your weight in pounds.

* Vest Color:

* Would you like a Baton pouch added onto your vest?:

Please provide the Length and Width of your Baton (When it is closed) below:

* Would you like a Handcuff pouch added on your vest?:

* Would you like an OC/ Pepper Spray pouch for your vest?:

Please provide the Length and Width of your OC Can below:

* Would you like a Flashlight Pouch added onto your vest?:

Please provide the Length and Width of your Flashlight below:

* Would you like a Magazine Pouch (Single or Double) added onto your vest?:

* Would you like a Hidden Backup Gun Holster on the inside of your vest?:

Concealed handgun holster sits on the inside of your load bearing vest so you can always keep a backup weapon within reach.

Hidden gun holster on inside lbv image

* Would you like a Radio pouch added onto your vest?:

When you select your radio pouch size, please consider the height of the radio pouch compared to the height of your actual radio (not counting the antenna). For example, If your radio is 5 inches tall to the top of the Frequency knobs, you may want to order a pouch that is 4.5 inches tall so the top of the radio sticks out a little.

Please provide the Length, Width, AND Thickness of your Radio below:

Do not include the antenna in the measurements, only the body of the radio

* Would you like a Tourniquet Pouch added onto your vest?:
Yes

* Would You Like to Add Level 4 Armor Plates and/ or Rifle Plate Insert Pouches to your vest? :

small inserting rifle plate just back plate small file

These Level 4 armor insert pouches allow you to insert Level 4 armor into your vest without needed to remove your Load Bearing Vest AND it still allows you to access all of your items on the front of your vest (magazines, handcuffs, radio, OC, custom pouches, etc.)

* Would You Like to Have Molle Webbing on the Side Straps?:

Upload a Picture of yourself Wearing Your Body Armor Vest:

* Please Select Your Name Tag Option:

If you send us an embroidered name tag made from an outside source it can be sewn onto your vest. However, we will not be responsible if the material colors of your name tag and the color of the load bearing vest do not match.

If you are getting an Embroidered Name Tag, what color would you like the letters to be?:

Please Enter Additional Name Tag Notes Below:

If you requested an Embroidered Name Tag, Please enter here what Name you would like on the name tag.

* Would You Like to Have a Velcro Retention Piece Sewn on to your Vest that will Hold your Radio Antenna in place?:

The velcro retention piece we offer can be added onto your vest and hold your radio antenna securely in place, so it stays out of your way while on duty.

* Please Select Your Badge Option:

* Please Confirm Pouch Configuration / Order Notes. List the Order of Your Pouches from your Left Hand to Your Right Hand.:

Note: This is a required field so something will need to be entered here in order to add your item to the cart.

If you ordered a vest with sewn on pouches, please list the order you would like them on the vest, starting from your left hand and going across the vest to your right hand. Example: From my left hand to right hand: Radio, Double Magazine, Double Handcuff, then Flashlight.

If you didn't order pouches that are sewn on, please type "N/A" or enter additional order notes.

* Please Enter your Purchase Order Number:

* Would You Like to Add an Inner Belly Band to your vest?:

The elastic inner belly band is connected to the back of the vest and wraps around your stomach, then velcros in place for a snug fit.

* Would You Like to Add Openings on the Vest so You Can Run Your Radio Cording Internally?:

* Would You Like to Add Hidden Rifle Mag Pockets on Your Vest?:

These specially designed hidden rifle mag pockets convert the standard lower pocket in to a spot to hold a rifle mag! We add elastic cording to give your rifle mag retention and keep it in place until you need it. This is an excellent way to carry a rifle mag without using up the space on the front of the vest.

Hidden Rifle Mag Pocket Zoomed in

* Would You LIke to Add a Mic Tab on the Center of Your Vest?:

* Please Read and Accept the Terms to Complete the Order for your Custom Load Bearing Vest:

By checking this box, I confirm that the custom load bearing vest layout, customizations, and pouch placement that I have submitted are correct. I understand that any further changes or adjustments to the custom LBV layout will result in additional charges.

By checking this box, I understand that once this order is submitted, that the custom LBV layout, customizations, and pouch placement that I selected will be the final layout for the custom LBV.

By checking this box, I agree that this is a custom, tailor-made product, and there are no refunds on custom orders. I also understand that production will not begin creating my custom LBV until I have submitted the necessary information / images required.

When submitting an order for brown and dark navy vests Bluestone uses Heavy Unbreakable Black Nylon thread unless specified in the order. You must disclose what thread color you would like us to use for your order if it is not Black in color. We do appreciate your business!

I agree and accept the terms

Price: $0.00

- +

Email a Friend

A study from the University of Wisconsin Eau-Claire has shown that police officers that wear load bearing vest carriers experience significantly less hip and lower back pain than those that wear only a duty belt. Our load bearing vest carriers (also known as external carriers) are proudly made in the USA and keep you safe while you protect others. Our load bearing vests are made to exactly fit each officer's bulletproof vest and perfectly match the officer's uniform. With just a few simple steps, we ensure that you'll receive a product that helps to reduce your hip and back pain. We are an industry leader in load bearing vest carriers and custom vests.

We take pride in our American Made products fully stand behind our products. If there's something you'd like that you don't see, please contact us.

Be safe out there.

Note: Each of our LBVs are fully custom made, and we can not accept returns on custom items.

First you will need the following:

Measuring tape
Paper
Front and back ballistic vest panels
Pen or pencil
Email address you use
Camera (you can use your phone to take a photo)

{slider Chest measurement}

Using the tape measure, measure your chest as shown in diagram 1.A. Write down the measurement.

Chest Measurement

Diagram 1.A - View Larger

{slider Back to Front}

Measure your vest from back to front as shown in Diagram 2.A and Diagram 2.B. The measurement should go from the bottom of the back panel of your vest, over your shoulder, to the front of your vest. Write down the measurement.

diagram2a

Diagram 2.A - View Larger

diagram2b

Diagram 2.B - View Larger

{slider Vest Gap}

Measure the gap from the bottom of your front panel to the top of your duty belt as shown in diagram 3.A. Write down the measurement.

vest gap

{slider Armor Measurements}

Next, take your front and back panels out of your carrier vest. Using the tape measure, find and write down the following measurements:

A. Measure the length of your back Ballistic panel as shown in Diagram 4.A
B. Measure the height of your Ballistic back panel as shown in Diagram 4.B
C. Measure the height of one side wing of your Ballistic back panel as shown in Diagram 4.C
D. Measure the length of your Ballistic front panel as shown in Diagram 4.D
E. Measure the height of your Ballistic front panel as shown in Diagram 4.E

{/sliders}

When you have finished these steps, please fill in your color preference and measurements in the fields above. Round your measurements up to the next inch.

Once you submit your order online, we will send you a follow-up email requesting the following photos:

We will need two pictures of the Officer in uniform wearing his or her body armor: one picture of the officer facing forward towards the camera and one of the officer turned to the side wearing his or her body armor. Please be sure the entire body armor vest is visible while being worn on the officer.
We will need photos of both of the Officer's ballistic panels: one photo of the front panel and another photo of the back panel.
A photo of the items you want pockets made for, laid out on front vest panel in the position you would like the additional pockets. For example: if you want a radio on the right side of your vest carrier and a flashlight on the left side, place them accordingly.

Your order will not be completed until you send the photos listed.

There are no reviews for this product.

Write a review

*Your Name:

*Your Email:

*Your Review:

*Rating:

BlueStone Safety Products

Michigan DNR Custom Load Bearing Vest with Molle on Bottom Half - Purchase Order | BCE-CUSTOM-MIDNR-HALF-MOLLE-PO

Price: $0.00

BlueStone Safety Reviews

Quick Links

Top Selling Products

Contact