Custom Load Bearing Vest with Molle on Bottom Half and Drag Strap on Back | BCE-CUSTOM-HALF-MOLLE Springfield MN PD PO Order

Custom Load Bearing Vest with Molle on Bottom Half - Purchase Order | BCE-CUSTOM-HALF-MOLLE-PO

Custom Load Bearing Vest With Molle On Bottom Half (EXCEPT IN THE MIDDLE)- Clark University PD | BCE-CUSTOM - PO Clark University

Product Code: BCE-Custom-PO-Clark-University

NOTE: All Required Questions (Marked with a red Asterisk *) need to be answered so your order may be added to the cartEach Custom-Tailored Load Bearing Vest is made to fit your body armor panels and inner carrier. Once completed, your body armor will remain inside of your current inner carrier, and will be placed inside of the BlueStone Safety custom external carrier that is made for you.To See More Colors and Styles of Our Load Bearing Vest Carriers,Please Click the Red Arrow to the Right of the Main Image

To order a custom fit load bearing vest, please fill in the measurements below using our Mobile-Friendly interface. With just a few simple pictures and measurements, we'll create the custom load bearing vest you've always wanted.Available Options

* A: Back Panel - Length:

Please specify the Back Panel Length in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Back Body Armor Panel with a Measuring Tape Showing the Width at the Widest Point:

If the photo upload is not working it is ok! You can email the photos to one of our customer service reps after the order has been placed. Please process the order without the photos and we will take care of them after the order is submitted.

* B: Back Panel - Height:

Please specify the Back Panel Height in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Back Body Armor Panel with a Measuring Tape Showing the Height down the Middle:

* C: Back Panel - Wing Height:

Please specify the Back Panel - Wing Height in inches:
(view Instructions tab below for clarification)

* D: Front Panel - Length:

Please specify the Front Panel - Length in inches:
(view Instructions tab below for clarification)

Upload a Picture of Your Front Body Armor Panel with a Measuring Tape Showing the Width at the Widest Point:

Upload a Picture of Your Front Body Armor Panel with a Measuring Tape Showing the Height Down the Middle:

* E: Front Panel - Height:

Please specify the Front Panel - Height in inches:
(view Instructions tab below for clarification)

* Chest Measurement:

Chest Measurement

Please specify the Chest Measurement in inches:
(view Instructions tab below for clarification)

* Mid-Abdomen:

Measure abdomen at the widest portion of your mid-section.

* Waist Size (in inches):

Please measure around your waist, just above your duty belt. Please give us this measurement in inches.

* Front to Back Measurement:

Front to Back

Please specify the Front to Back Measurement in inches:
(view Instructions tab below for clarification)

* Vest Gap:

vest gap

Please specify the Vest Gap Measurement in inches:
(view Instructions tab below for clarification)

* Height:

Please Enter Your Height. Examples: 5 feet 7 inches , 6 feet 2 inches, etc.

* Weight:

Please enter your weight in pounds.

* Vest Color:

Would You Like to Add a 2" tall x 4" wide "POLICE" Patch on the front of your vest above your name tag location?:

* Would you like a Handcuff pouch added on your vest?:

* Would you like an OC/ Pepper Spray pouch for your vest?:

* Would you like a Magazine Pouch (Single or Double) added onto your vest?:

Upload a Picture of yourself Wearing Your Body Armor Vest:

* Please Select Your Name Tag Option: :

If you send us an embroidered name tag made from an outside source it can be sewn onto your vest. However, we will not be responsible if the material colors of your name tag and the color of the load bearing vest do not match.

* Please Select Your Badge Option:

* Please Enter your Purchase Order Number:

* Would You Like to Add a Molle Body Cam Mount to the Center of your Vest?:

This option will put 2 pieces of molle on the center of your LBV, allowing you to attach a single column molle body cam attachment to your vest. Sample Shown Below.

NOTE: This will not work for a body camera attachment that requires 2 columns of molle. Please contact us if you have questions

* Please Read and Accept the Terms to Complete the Order for your Custom Load Bearing Vest:

By checking this box, I confirm that the custom load bearing vest layout, customizations, and pouch placement that I have submitted are correct. I understand that any further changes or adjustments to the custom LBV layout will result in additional charges.

By checking this box, I understand that once this order is submitted, that the custom LBV layout, customizations, and pouch placement that I selected will be the final layout for the custom LBV.

By checking this box, I agree that this is a custom, tailor-made product, and there are no refunds on custom orders. I also understand that production will not begin creating my custom LBV until I have submitted the necessary information / images required.

When submitting an order for brown and dark navy vests Bluestone uses Heavy Unbreakable Black Nylon thread unless specified in the order. You must disclose what thread color you would like us to use for your order if it is not Black in color. We do appreciate your business!

I agree and accept the terms

Price: $0.00

Qty: - +

Add to Wish List

Email a Friend

0 Reviews | Write a review

A study from the University of Wisconsin Eau-Claire has shown that police officers that wear load bearing vest carriers experience significantly less hip and lower back pain than those that wear only a duty belt. Our load bearing vest carriers (also known as external carriers) are proudly made in the USA and keep you safe while you protect others. Our load bearing vests are made to exactly fit each officer's bulletproof vest and perfectly match the officer's uniform. With just a few simple steps, we ensure that you'll receive a product that helps to reduce your hip and back pain. We are an industry leader in load bearing vest carriers and custom vests.

We take pride in our American Made products fully stand behind our products. If there's something you'd like that you don't see, please contact us.

Be safe out there.

Note: Our custom load bearing vests are dry clean only - if you decide to wash your LBV with a different method, you do so at your own risk. If you make this decision, be very careful of the detergent you choose as it will negatively affect the appearance of your vest and will cause discoloration (for dark colored LBVs you may need dark care laundry detergent). Also, be sure to NEVER put your LBV in a dryer!

Note: Each of our LBVs are fully custom made, and we can not accept returns on custom items.

First you will need the following:

Measuring tape
Paper
Front and back ballistic vest panels
Pen or pencil
Email address you use
Camera (you can use your phone to take a photo)

Chest measurement

Using the tape measure, measure your chest as shown in diagram 1.A. Write down the measurement.

Diagram 1.A - View Larger

Back to Front

Vest Gap

Armor Measurements

Next, take your front and back panels out of your carrier vest. Using the tape measure, find and write down the following measurements:

A. Measure the length of your back Ballistic panel as shown in Diagram 4.A
B. Measure the height of your Ballistic back panel as shown in Diagram 4.B
C. Measure the height of one side wing of your Ballistic back panel as shown in Diagram 4.C
D. Measure the length of your Ballistic front panel as shown in Diagram 4.D
E. Measure the height of your Ballistic front panel as shown in Diagram 4.E

When you have finished these steps, please fill in your color preference and measurements in the fields above. Round your measurements up to the next quarter inch.

When you submit your order online, we will also need the following photos:

We will need one picture of the Officer in uniform wearing his or her body armor facing forward towards the camera. Please be sure the entire body armor vest is visible while being worn on the officer.
We will need photos of both of the Officer's ballistic panels with a measuring tape on it, confirming the measurements provided to us.

There are no reviews for this product.

Write a review

*Your Name:

*Your Review:

Verification code*

BlueStone Safety Reviews

"As the senior merchandise buyer for the National Rifle Association's online store and catalog (NRAstore™), I am writing to you on behalf of BlueStone Safety Products. We've been working with and buying from Bluestone for nearly seven years. Together, we've built many quality products for the civilian and law enforcement market. I would strongly recommend Bluestone Safety Products as a valued and dedicated supplier...Their innovative, American-made designs resonate with the firearms community, and this is evidenced by their dedicated following with NRA members."

Brian Evans - NRAstore Senior Merchandise Buyer

"I just had my first vest made at BlueStone and I am extremely impressed with it! The quality of vest is excellent, it was custom made to fit and it fits PERFECTLY! The customer service was wonderful, everyone here is extremely welcoming and willing to help with what ever your needs are. I will absolutely recommend them in the future!"

Kayla Wolf - Marshfield Police Department

"I would like to extend my sincere appreciation to BlueStone Safety Products for your service with custom fitted Bulletproof vests and vest covers to our department since 2008.

I would like to share with you that my officers have worn your body armor and are happy with the custom fitting for concealment of secondary/ back-up equipment meeting our department's uniform specifications for Vest Covers and Body Armor. You have also made our expereince with your support in documentation for the Bulletproof vest partnership Grant application easy for Northeastern Illinois University Police Department. We are looking forward to future experiences and appreciate the efforts of BlueStone Safety Products for Northeastern Illinois University Police Department."

Lt. Kruszynski - Northeastern Illinois University Police Department

"I have been a police officer in Gary, Indiana for 12 years. Bluestone Safety formally know as Nate's, has supplied me with highest quality outer vest carries for my career. The first outer vest carrier lasted in the outdoor work environment for 5 years before it needed to be replaced. They promised me that the vest would be completed in a few days. I received a call the next day advising me that they were finished with my order. That was one day faster than they predicted. The vest fits great along with all of my equipment inside. Overall, I am very satisfied with Bluestone Safety. I recommend Bluestone Safety to all Law Enforcement Agencies."

BlueStone Safety Products

Sign Up For Our Newletter